Starrett PKG08806-UMDFG, User Manual

Page: 15 / 36

PKG08806-UMDFG 15
ENGLISH
4.0 FORCE GAGE OPERATION
4.1 POWER ON/OFF
Turn the force gage ON by pressing the Power key.
Turn the force gage OFF by pressing and holding the Power key down
for 3 seconds.
4.1.1 AUTOMATIC SHUTDOWN
The force gage may be setup to automatically turn OFF
after a period of time when no load has been applied or when no
keypress has taken place.
4.1.2 CHARGING BATTERY
Charge the battery using the USB Cable that was supplied with the force
gage. Connect the USB cable to the force gage and then to the power source.
Charging through source power @ 100-240V is considerably faster than
charging through a personal computer's USB.
NOTE
1. When the force gage is connected to the FMM Digital Force Tester using the RS-232 cable,
the force gage is continually being charged while the FMM Digital Force Tester is ON.
2. The force gage may be used while it is being charged.
3. The force gage display will remain ON during charging. You cannot turn the force gage to
OFF during a charge.
4.2 GAGE DISPLAY FORMATS
This section will show common display formats and their attributes.
4.2.1 REAL TIME DISPLAY
When the force gage is in REAL TIME MODE, the force gage will display
the following:
4.2.2 PEAK TENSION DISPLAY
When the force gage is in PEAK TENSION MODE, the force gage will
display the following:
Display
Auto Off
Off
1 Min
5 Min
15 Min
30 Min
Auto Off Setup Option
(See Setup for more information)
Shown: Real Time view showing Peak Compression
lbf
16.84
0.00
16.89
7
Real time load being placed on load cell
Compression Direction
Peak/Max Compression
Real Time Mode Indicator
lbf
7
22.29
19.24
Shown: Peak Tension view
Peak Tension Mode Indicator
Real Time value
Tensile Direction
Peak/Max Tension