Starrett PKG08806-UMDFG, User Manual

Page: 17 / 36

PKG08806-UMDFG 17
ENGLISH
4.4 SAVING RESULTS
The DFG feature an internal memory for saving results for the purpose
of calculating and displaying statistics. You may save up to 50 individual
results in memory.
Results saved to memory MUST be of the same type. You cannot have
mixed type results. For example, you cannot save tension results with
compression results. Results MUST be of the same type.
Management of the DFG memory is important to ensure correct
statistical analysis. Always clear old results that are from a different
test method.
NOTE
Results saved for statistics must be of the same test method for statistics to be correctly calculated.
To Save results to memory, a Softkey must be setup with the SAVE
function. See the Setup section for more information.
Once a result is displayed by the DFG, pressing the SAVE softkey will
save the displayed result to memory.
Results may be saved with or without units.
4.5 EXPORTING RESULTS
The DFG can export results to an external device, such as a computer
with WinWedge software. Use the Send function to export a result to
WinWedge on a computer connected to the DFG Force Gage.
4.2.9 OVERLOAD CONDITION DISPLAY
When the load applied to the force gage's load cell exceeds the full scale
capacity, an overload condition occurs and the force gage will display
the following:
NOTE
Immediate action to remove the overload should be taken to avoid permanent damage to
the load cell sensor.
4.2.10 ABOUT DISPLAY
The About view is accessed through the main setup menu. Select the
About menu option and the DFG will display the following:
• DFG Model Number
• Serial Number
• Full Scale Capacity
• Last Calibration Date
• Overload History
lbf
112.40
91.85
Load Overload Display
S/N
Firmware
Battery %
Overloads
DFG
500 N | 100 lb
00.02.07
0
About Display
Result Type Memory Type
MODES
Real Time Real Time
Tension Peak Tension Peak
Compression Peak Compression Peak