62
Keyset Mode
In the P mode
(LED flashes at 30 ipm), you hear three bursts
of tone and one-way announcement. The calling party
cannot hear conversations in progress.
Lift the handset or press the ON/OFF button to
answer,
-or-
Press the H-T-P button to the H mode to reply.
In the H mode
(No LED), you hear three bursts of tone and
an announcement.
Reply handsfree or lift the handset for privacy.
SINGLE
LINE
TELEPHONE
To place an intercom call:
1.
Lift the handset.
2.
Dial the intercom number. You will hear ringing if the called
station is in the “T” answering mode or two bursts of tone if
the called station is in the “H” or “P” positions.
3.
Hang up to end the call.
To answer an intercom call:
Lift the handset,
-or-
If your SLT is equipped with a speakerphone, press the
Speaker button to converse in a handsfree mode.
Keyset Mode
This feature allows you to determine the mode and baud rate
of the optional CTI Module connected to your phone. This
setting is stored in back-up memory in the case of a power
outage or system reset.
