Intercom
59
Intercom
Using an Intercom Button
To program a Flexible Button as an Intercom Button:
1.
Press the SPEED button twice.
2.
Press the desired flexible button to program.
3.
Dial [645] on the dial pad. A confirmation tone sounds. If an
error was made during entry, error tone sounds.
When intercom call rings a busy station (w/intercom btn):
1.
The calling station receives ringback tone instead of busy
tone. The called station hears muted or reminder ring and
their intercom button LED starts flashing at the incoming
CO line rate. This indicates an incoming intercom call.
2.
The called station can place the current CO call on hold by
pressing the HOLD button,
-or-
Place the current intercom call on hold by pressing the
HOLD button. The intercom call is placed on hold on the
available intercom button.
3.
Called station then presses flashing intercom button to
answer incoming intercom call. Once the call is answered,
the following message displays on the called station LCD:
Sta XXX can be a programmed station name.
SINGLE
LINE
TELEPHONE
Not applicable
C A L L F R O M S TA XXX
M M M D D Y Y
H H : M M a m
❑
Flex
Btn
