24
Attendant Features
Attendant Setting Time and Date
System Time/Date must be set by the first programmed
Attendant via admin programming or using feature code 692.
To set using the feature code:
1.
Dial [692] on the dial pad. A confirmation tone sounds.
2.
Enter date and time as follows: YYMMDDHHMM
When the correct number of digits are entered, a
confirmation tone sounds.
3.
Press the ON/OFF button to OFF to update the display.
Attendant Speed Dial - System Storing
System Speed numbers must be entered by the first
programmed Attendant. If an Attendant is not specified, enter
at Station 100.
1.
Press SPEED once, then press the desired outside line key,
-or-
Press SPEED twice to select an outside line automatically.
2.
Dial the System Speed bin location (9020-9999).
3.
Dial telephone number.
4.
Press SPEED.
5.
Hang up.
To use the following speed dial options, enter as
shown:
Initiate a Pulse-To-Tone Switchover -- Press TRANS
during number entry.
Insert a Pause -- Press HOLD during number entry.
Insert a Flash into the Speed Number -- Press FLASH.
YY
= Year (00-99)
HH
= Hour (00-23)
MM
= Month (01-12)
MM = Minute (00-59)
DD
= Day (01-31)
