Call Park
33
5.
Dial the three- or four-digit destination number where calls
are to be forwarded. (System Speed Bin, Station, Voice Mail,
ACD/UCD, or Hunt Groups.) A confirmation tone sounds;
five seconds later a dial tone is received.
To remove Follow-me Call Forwarding (off-site location):
1.
Dial into the system on a DISA or TIE trunk. Enter the DISA
access code, if applicable.
2.
Dial the Follow-Me Forward code [642] on the dial pad.
3.
Dial the station number of the station that forwarding is to
be cancelled.
4.
Dial [6] (regardless of the forward condition).
5.
Redial the same station number. Confirmation tone sounds;
5 secs later = dial tone.
Call Park
Call Park - Personal
Each digital telephone in the system can place a call into a
personal park location and then later retrieve that call from the
originating station. Intercom calls and CO line calls can be
placed into the stations’ personal park location. Calls parked in
a personal park location are subject to the system call park
recall timer. A station retrieving a personal parked CO call must
have either a direct CO line appearance or an available loop
button to retrieve the parked call.
To park a call, while connected to an outside line:
1.
Press the TRANS button. The caller is put on Exclusive Hold.
2.
Dial the Personal Park location [438] on the dial pad,
-or-
Press the
preprogrammed
PERSONAL PARK button. Dial
tone sounds.
