Before You Begin Installing
53722
3-1
Section 3
Before You Begin Installing
This section of the manual is intended to help you plan your tasks to facilitate a smooth
installation. Please read this section thoroughly, especially if you are installing a SCSS-700 or
SCSS-700ND panel for the first time.
3.1
What’s in the Box?
The SCSS-700 or SCSS-700ND ships with the following hardware:
•
A cabinet with all hardware assembled
•
Two keys for the front door
•
Ten 4.7K ohm end-of-line resistors
•
A battery cable for batteries wired in series
3.2
Environmental Specifications
It is important to protect the SCSS-700 control panel from water. To prevent water damage,
the following conditions should be AVOIDED when installing the units:
•
Intended for indoor use in dry locations only
•
Do not mount directly on exterior walls, especially masonry walls (condensation)
•
Do not mount directly on exterior walls below grade (condensation)
•
Protect from plumbing leaks
•
Protect from splash caused by sprinkler system inspection ports
•
Do not mount in areas with humidity-generating equipment (such as dryers, production
machinery)
When selecting a location to mount the SCSS-700 control panel, the unit should be mounted
where it will NOT be exposed to temperatures outside the range of 0°C- 49°C (32°F-120°F)
or humidity not exceeding 93% noncondensing.
Summary of Contents for SCSS-700
