Stanley SCSS-700, Installation & Operation Manual

Page: 113 / 258

Network Management
53722 6-7
2. Select for Network Programming.
3. Press for Dialer.
6.2.6.1 Dialer Assignments
Each panel on the SCSS-700 network specifies which network dialer is used for reporting.
The network dialer capability of the SCSS-700 system allows all panels to use the same dialer
providing an economical solution for reducing the number of phone lines required for
reporting purposes. A dialer is specified by panel number. The network dialers will be used to
report events according to the dialer report table.
6.2.6.2 Dialer Miscellaneous
When using the SIA reporting format, the dialer sends modifier information according to the
SIA Modifier option. The selections for this option are enable PI SIA Modifier, Yes or No.
The default selection is Yes. If set to “No”, the panel ID will be included as part of the SIA
event string.
6.2.6.3 Receiver Configuration
The SCSS-700 network can report events to as many as four receivers. Each receiver is
assigned a phone number and reporting format. Phone numbers can be up to forty digits long.
Format choices are SIA, Contact ID, or Unused.
6.2.6.4 Dialer Report Table
The Dialer Report Table specifies event reporting for each panel on the network. Each row in
the table specifies a panel, event types to report, primary and backup reporting channel, and
report by point or zone. Associated with the receivers are account number and daily test
option. The table can have up to 99 rows.