Stanley SCSS-700, Installation & Operation Manual

Page: 160 / 258

Model SCSS-700 Installation Manual
9-12 53722
9.4 Group
An output group is made up of output points that have been programmed to respond in the
same way. Output groups simplify programming because you have to program the output
characteristics that are common to all of the group points once, instead of programming each
individual point. Once you have defined the characteristics of output groups, you can assign
each point to the appropriate group. All valid output points are assigned to only one output
group. Unused points are not assigned to any output group. Up to 999 output groups can be
defined per panel.
Each output group is defined as either a voice output group or a non-voice output group.
Output points that are audio circuits (all circuits on the VIP-Amplifier and VIP-CE4) can only
be assigned to voice output groups. Output points that are non-voice circuits (all other points
and circuits that are on all modules except the VIP-Amplifier and VIP-CE4) are assigned to
non-voice output groups.
9.4.1 Edit Group
In the edit group option you can program the name of an output group (Section 9.4.1.1) and
change the properties (Section 9.4.1.2) of that group.
To edit a group, follow these steps:
1. Enter the installer code. The panel will automatically go to the main menu.
2. Select for Panel Programming.
Display reads:
Initializing
Please wait. . .
3. Press to enter group menu.
4. Press to edit group.
5. Enter the number of the group you wish to edit, then press .