Stanley 00496014, Instruction And Service Manual

Page: 22 / 300

SYMPTOM POSSIBLE CAUSE REMEDY PAGE REF.
Trigger inoperative Static friction Depress trigger a few times
Low air pressure Increase air pressure
Valve piston remains stuck
Depress trigger several times. Lubricate
tool through air inlet. If unsuccessful,
dismantle, clean and lubricate trigger
elements
Drive screw does not
return and/or keeps
spinning off
Lip seal
18
is defective Replace 17
Tool does not spin off Adaptornut
92
loose Tighten
No air supply Connect
Rear casing unscrewed by more than 5
turns
Set tool stroke 5 turns
‘O’ring
82
leaking air Replace 18
Distributor stuck Lubricate
Air motor jammed
Lubricate tool at air inlet. If insufficient
dismantle and clean air motor thoroughly
Item numbers in
bold
refer to general assembly drawings and parts list (pages 18-19).
Other symptoms or failures should be reported to your local Stanley Engineered Fastening authorised distributor or repair
centre.
22
ENGLISH ORIGINAL INSTRUC TION