manualshive.com logo in svg

Standard Horizon CP180, Owner'S Manual

Share
Download
Standard Horizon CP180 Owner'S Manual Download Page 52

Page 54

GPS Chart Plotters

R

Note that in the top of the previous picture the chart scale remains the same but it is
graphically compressed.
By pressing 

[ZOOM IN]

/

[ZOOM OUT]

 a popup window is displayed on a corner of the chart

screen. The window shows the current zoom factor: Normal is the original chart level (1:1
scale), Over-Zoom x2, x4, x16, x32, Under-Zoom x1/2, x1/4.

To activate this function follow the procedure:
1. Press 

[MENU]

. Move the ShuttlePoint knob to highlight 

SETUP MENU 

and press 

[ENT]

.

2. Move the ShuttlePoint knob to highlight 

MAX FUNCTIONS 

and press 

[ENT]

 or move

the ShuttlePoint knob to the right.

3. Move the ShuttlePoint knob to highlight  

ZOOM TYPE 

and press 

[ENT]

 or move the

ShuttlePoint knob to the right.

4. The menu now shows two selections, 

STANDARD

 or 

FLEXI-ZOOM

.

5. Move the ShuttlePoint knob to select the selection and press 

[ENT]

.

6. Press

 [CLR]

 until the menu disappears or an easier method is to move the ShuttlePoint

knob to the left a few times.

6.0.1 Icons Size

On MAX charts it is possible to set the size of all icons drawn on the charts, selecting
between Standard and Large size.

ICONS SIZE standard

ICONS SIZE large

Figure 6.0.1 - Icons Size

To activate this function follow the procedure:
1. Press 

[MENU]

. Move the ShuttlePoint knob to highlight 

SETUP MENU 

and press 

[ENT]

.

2. Move the ShuttlePoint knob to highlight 

MAX FUNCTIONS 

and press 

[ENT]

 or move

the ShuttlePoint knob to the right.

3. Move the ShuttlePoint knob to highlight  

ICONS SIZE 

and press 

[ENT]

 or move the

ShuttlePoint knob to the right.

4. The menu now shows two selections, 

STANDARD

 or 

LARGE

.

5. Move the ShuttlePoint knob to select the selection and press 

[ENT]

.

6. Press

 [CLR]

 until the menu disappears or an easier method is to move the ShuttlePoint

knob to the left a few times.

6.0.2 Place Names Size

On MAX charts it is possible to set the size of all names drawn on the charts, selecting
between Standard, Medium and Large size.

Summary of Contents for CP180











































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands