manualshive.com logo in svg

Standard Horizon CP180, Owner'S Manual

Share
Download
Standard Horizon CP180 Owner'S Manual Download Page 23

GPS Chart Plotters

Page 25

R

GPS Chart Plotter, and is supplied with mounting hardware kit, interconnection cable and
a RADAR Junction Box.
Please refer to the Radar Installation Manual and Radar Operation Manual available at
www.standardhorizon.com.

2.10 PERSONAL COMPUTER CONNECTIONS

The GPS Chart Plotter can be connected to output Marks, Routes and Tracks to many PC programs
available. To send or receive User Points the PC Program must be able to receive NMEA WPL and
RTE sentences. Refer to the table below for connection to a Serial DB9 connector.

Pin

PC DB9 connection

NMEA connection

2

Receive

Brown

3

Transmit

Blue

5

Signal ground

Green

By default Port1 is set to receive or send User Points to and from a PC. The GPS Chart
Plotter may be setup to send and receive the User Points on a different Port using the
following procedure:
1. Press 

[MENU]

. Move the ShuttlePoint knob to highlight 

SETUP MENU 

and press 

[ENT]

.

2. Move the ShuttlePoint knob to highlight 

ADVANCED SETUP 

and press 

[ENT]

 or move

the ShuttlePoint knob to the right.

3. Move the ShuttlePoint knob to highlight 

IN/OUT CONNECTIONS 

and press 

[ENT]

 or

move the ShuttlePoint knob to the right.

4. Move the ShuttlePoint knob to highlight 

SEND/REC RTE & MARKS 

and press 

[ENT]

or move the ShuttlePoint knob to the right to show the popup window.

5. Move the ShuttlePoint knob to desired Port and press 

[ENT]

.

The PC COM settings are:

·

Baud Rate

: 4800

·

Parity

: N

·

Data Bits

: 8

·

Stop Bits

: 1

·

Flow Control : N

The format of the sentences that are sent:

·

MARK

$GPWPL,3249.061,N,00710.651,E,MRK002*22

·

WAYPOINT

$GPWPL,3933.008,N,00639.969,E,WPT012*22

·

ROUTE

$GPWPL,2544.362,N,08011.672,W,WPT003*32
$GPWPL,2543.921,N,08011.481,W,WPT004*31
$GPWPL,2543.493,N,08011.768,W,WPT005*37
$GPRTE,2,1,c,ROUTE01,WPT003,WPT004,WPT005*21

2.11 NMEA DATA PAGE

The NMEA Data Page is very useful to see if a External device (example: Depth Sounder)
is transmitting NMEA sentences to the GPS Chart Plotter. This page can also be used to
see if the GPS Chart Plotter NMEA output is being loaded down by a external NMEA device
the GPS Chart Plotter is connected to. Example:
VHF Radio connected but the radio is not receiving a GPS Position.

Summary of Contents for CP180











































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands