Page 44 of 56
4.2
MDB
This document is for the set-up of MDB-compatible credit card systems including: Nayax VPOS,
USA Technologies ePort, and CryptoPay.
EF+ Menu:
Under CREDIT SETTINGS then CARD SYSTEM TYPE, an option has been added for
“MDB (ONLY)”. This allows the system to report email alerts about its status. The Card system will
then show up in the Configuration report as a CARD READER – X MDB indicating the dispenser it
is plugged into – if we are able to talk to the device.
NOTE:
Standard Change-Makers does not supply any of these third-party credit card processing
systems. The customer must contact the manufacturers to order the kits and set-up their merchant
account with the required processor. It is therefore important that the customer contact Technical
Support of the manufacturer when they have completed the installation of the machine to supply the
serial numbers or their kit components and make sure that the devices are properly directed to deposit
funds into their account.
When communicating with the Sales/Tech Support person – be sure that you tell them that you need
the MDB-compatible devices. And that the MAXIMUM CHARGE AMOUNT must be set higher
than your expected highest selection or charge amount (to accommodate for future price changes if
needed).
For example: The manufacturer may have a default maximum setting of $25.00. If you plan to have a
$30 price package, you may request them to set the kit up for a $50.00 maximum charge to allow for
changes in the future.
Note: The card system reporting provided by the credit card processor if available, will reflect card
processing only. No information from the bill acceptor, coin acceptor, or machine in general will be
added to this report. Machine audits and alerts are available throughout the EF+ Module when
properly connected to your high-speed network.
** IMPORTANT NOTE ** IMPORTANT NOTE ** IMPORTANT NOTE ** IMPORTANT NOTE **
Before you put the machine in service with the Third-Party MDB Credit Card Kit, be certain to contact the
manufacturer or processor, of the credit card device and ask them to confirm the Serial Numbers of the
device in your machine are connected to your Merchant Account, and that they are ready for you to start
processing cards.
Once you receive their approval – run a test transaction with a real credit card and check to see that it went
through. You are now ready to proceed!
** IMPORTANT NOTE ** IMPORTANT NOTE ** IMPORTANT NOTE ** IMPORTANT NOTE **
Summary of Contents for CMP-20
Page 1: ......
Page 2: ...Page 2 of 56 ...
Page 6: ...Page 6 of 56 ...
Page 55: ...Page 55 of 56 NOTES ...
