Standard Change-Makers CMP-20, Operating Manual, Page: 24 / 56

Page 24 of 56
1.19.1 Recipient
Name
- You can change the name from the generic “Recipient X” to a more recognizable name. This
is only for your reference and it is not necessary for sending an email.
Address - Enter the email address to receive the reports and alerts. If you want to send reports or
alerts to your smart phone as a text message, please see the Free Email to SMS Gateways (section
1.19.7). The ‘@’ can be entered by pressing the zero key multiple times.
Test Alert
– By pressing the YES button you will send a test alert to the email address you entered in
the previous step. Please watch the emailing process to ensure that the email was sent correctly. As
long as the address resembles
name@domain.extension and you have a good connection the email
will be successful so check your spelling.
1.19.2 Alerts
All alerts default to NO. If you wish to receive an alert press the YES button. You will receive the
alert when the condition is activated and another alert when the condition is deactivated, if the
deactivated is possible. As an example, you get a Reset Pressed alert but you cannot get a Reset Not
Pressed alert. Same with Power Returned. Alerts are small enough that they can be sent to an email
account or a text account.
edit report
Send time?
send all reports on
< Everyday >
send all reports at
(h:m) 11:00 PM
clear all reports
after send? NO
send service
reports now?
print email
settings report?
end of email
settings report
Y