manualshive.com logo in svg

Standard Change-Makers CMP-20, Operating Manual, Page: 54 / 56

Share
Download
Standard Change-Makers CMP-20 Operating Manual Download Page 54

Page 54 of 56 

 

Appendix B.

 

SELECTION WORKSHEET: 

 
The following is a worksheet intended to help owners figure the set-up for the Token / Ticket pay-
outs of their change machine.  
 
With the credit selection, the four buttons are used for the credit card purchases: 
 

   BUTTON A:  $_______  =  _______ Tokens/Tickets 
 
   BUTTON B:  $_______  =  _______ Tokens/Tickets 
 
   BUTTON C:  $_______  =  _______ Tokens/Tickets 
 
   BUTTON D:  $_______  =  _______ Tokens/Tickets 
 

* Our suggestion is to always put the higher priced packages at the top (Button A) and go down from 
there.  
 
If your credit card accepting machine also has cash acceptance (Bill and/or Coin Acceptor), you can 
keep the packages the same as the credit card selections.  However, in most cases merchants do not 
want to accept credit cards for $1.00 transactions, because the fees would be too high. Therefore, we 
make the cash pay-outs specific to the denomination: 
 

   $20 Bill  =  _______ Tokens/Tickets 
 
   $10 Bill  =  _______ Tokens/Tickets 
 
     $5 Bill  =  _______ Tokens/Tickets 
 
     $1 Bill  =  _______ Tokens/Tickets  
 
 $1 Coins  =  _______ Tokens/Tickets 
 
   Quarter  =  _______ Tokens/Tickets 

# 

 

ACCUM. Nickels/Dimes  =  _______ Token / Ticket 

# 

 

#

  If the value of the Token/Ticket is more than a quarter, you can ACCUMULATE quarters, and 

other change, to the value of one token/ticket and have the machine dispense once the lowest price is 
accumulated. 
 

NOTE: Once inserted, the bill acceptor and coin acceptor do not return money. 

 

 

Summary of Contents for CMP-20

























































Reviews:

No comments