Standard Change-Makers CMP-20, Operating Manual

Page: 30 / 56

Page 30 of 56
1.22 Other Settings
This feature group is where all miscellaneous settings are located.
Below is a list of each one.
x
Auxiliary Button – Selects the function of the Auxiliary
Button Input. The default is key switch. When the key switch
is turned the EF+ will display the Dispense Amounts from
each dispenser that has a Dispenser Fill setting. Next it will
display and print the Transaction Report. Then it will show
any active errors. If the Auxiliary Button is selected to be a
language button pressing the button will cause the user
display to toggle between the 1
st
and 2
nd
user language.
x
Owner Language – used to set the language (English,
French, and Spanish) displayed on the internal EF+ Module
display.
x
User 1
st
Language – The primary language displayed to the
user. This will be the default language used upon power up.
x
User 2 nd Language – The secondary language that will be
seen if the language button is pressed. Pressing the language
button again will have the user display switch back to the 1
st
language. The machine will automatically switch back to the
1
st
language after the transaction. The auxiliary button must
be set to language to use the 2
nd
language and a button must me connected.
x
Machine Type – This is used to identify if this machine includes any Expanded Function hardware
modules. The default setting used in most machines is the basic Change Machine type. If your
machine includes a Credit Select, Pulse Select or Package Select module, this setting allows the
machine to know it has one of these expanded function modules connected.
x
Error Time Out – This feature allows the machine to automatically reset from certain error types;
at this time the Error Time Out only applies to Fast Vend Shutoff and a Stringing Detected Error,
error conditions. For these errors the machine will be automatically reset following the time period
in minutes you entered.
x
Hold Escrow – During a coin accumulation through the coin acceptor (example: 2 dimes + 1 nickel
= quarter payout) a customer may deposit three dimes and receive one quarter. If a five-cent hopper
is not available in the machine, an escrow (unpaid balance) of 5 cents is present. This feature allows
you to clear this escrow amount (enter NO) or simply “Hold” it and add the amount to the next
deposit. Enter YES if you want to “Hold” it.
x
Dispenser Transfer – The term “transfer” refers to the machines ability to “transfer” an owed
amount from a dispenser that is in error or is empty, to another dispenser in the machine. The
primary purpose of the dispenser transfer feature is to keep the machine on-line even if it has to
adjust the payouts.
There are four different transfer modes available with your machine:
method always – transfer to any dispenser available
method none – do not transfer
method equal – only transfer between dispensers of the same type and value
method less – transfer to any dispenser of the same or lesser value.
It is important to note that these transfer features will only transfer dispense amounts between “like
type” dispensers. The dispenser types are:
Change (coin or bill ), Token, Ticket and Card. Example:
Pressing the help
button (?) will show
you “Please select a
language.”
A machine that
dispenses based on the
bill or coin deposited.
The machine will stay in
service as long as one of
lowest valued dispensers
is available.
OTHER
SETTINGS
Language
English
Error timeout
15
end of
other settings
Additional report items
Machine type
changer
Disp Transfer
Method less