Standard Change-Makers CMP-20, Operating Manual

Page: 26 / 56

Page 26 of 56
Resettable Summary Audit – This is the same summary audit that can be viewed or printed at the
EF+ Module. If the report is cleared at the EF+ Module, then the report that you receive will be
cleared.
Perpetual Summary Audit – This is the same summary audit that can be viewed or printed at the
EF+ Module. This can only be cleared at the factory. Eventually the counts or amounts will rollover
at 99,999,999 and the dollar values will roll over at $999,999.95. You will have to do the math
accordingly.
Resettable Detailed Audit
– This is the same detailed audit that can be viewed or printed at the EF+
Module. If the report is cleared at the EF+ Module, then the report that you receive will be cleared.
Perpetual Detailed Audit
– This is the same detailed audit that can be viewed or printed at the EF+
Module. This can only be cleared at the factory. Eventually the counts or amounts will rollover at
99,999,999 and the dollar values will roll over at $999,999.95. You will have to do the math
accordingly.
Door Audit, resettable – This is a snapshot of the resettable audit and is sent only when the door is
opened. If the report is cleared at the EF+ Module, then the report that you receive will be cleared.
This is not sent with the other reports.
Door Audit, perpetual – This is a snapshot of the perpetual audit and is sent only when the door is
opened. This is not sent with the other reports.
Enable Account- Please enable the account to receive any of the reports and alerts that you have set.
If not enabled reports and alerts will not be sent to this account. The account can be disabled when
they are on vacation. Disabling the account will not change any of the settings in the account.
1.19.4 Report Send Time
It is necessary that the EF+ Module has power and a good network connection at the time the reports
are to be sent. If the EF+ Module does not have power during the Report Send Time you will not
receive your reports. It is also necessary that the EF+ time is set correctly if you are to receive your
reports when you expect them. Please see “update the time?” in OTHER SETTINGS to set the
correct time.
Day – Select the day of the week to send the reports. If “None” is selected no reports will be sent.
This can be useful if you only want to send reports using the Quick Email Report described below.
“Everyday” is the selection to choose if you want to receive reports seven days a week.
Time – Enter the time of the day that you want to send the reports. It is recommended that the reports
go out after closing. The time is a 12-hour clock. Pressing any numeric button while the cursor is
under the A in AM or the P in PM will cause it to toggle.
Clear All Reports – After the reports are sent the reports that were sent and that can be cleared will
be cleared at the EF+ Module. This will also affect anybody viewing or printing the reports at the
EF+ Module.