02
01.1 WARNING FOR SAFETY
01. WARNINGS. PAY ATTENTION!
Important safety instructions!
ü
Read the technical specifications on the paragraph “Technical specifications” to evaluate the operating limits of the product.
ü
Before installing the product, check the compatibility with the associated devices and accessories.
ü
The motor connected to the device must be of the type "mechanical limit switches", without any electronic control ; The motor must be of adequate power to
the load (check the nameplate data on the motor).
ü
Check that the package is intact and has not been damaged in transit.
ü
A heavy shock and the use of unsuitable tools can cause the damage of the external or internal parts of the product.
ü
Do not pierce or tamper with the product in any way. Do not modify or replace parts without the manufacturer’s permission.
ü
Check that the place chosen for the installation of the product permits the same wind exposure of the blind to be automated.
ü
Check that the place chosen for the installation is made by solid material and can ensure a stable fixation.
ü
If there are several radio appliances in the same system, they must not be less than 1,5m apart.
ü
Do not install the product near metal surfaces.
ü
Do not install the product near heat sources (such as chimneys, etc....).
ü
Adjust the inclination of the device to have the blades positioned horizontally.
ü
The blades for the wind detections must be faced downward. The blades must be free to rotate without obstruction.
ü
Check that the device is placed in a protected position from accidental impact with other object (e.g. branches, etc.).
ü
The power cable must be positioned in such a way that it does not come into contact with moving parts.
ü
Do not use abrasive or solvent product for cleaning the device; do not clean using water or high-pressure cleaners.
ü
For your safety, do not work near the winding roller while the motor is powered.
01.2 WARNING FOR INSTALLATION
ü
The product is not intended to be used by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they are supervised or given instructions about the product way of use by a person responsible for their safety.
ü
Check the automation during the movement and keep people at a safe distance, until the movement ends.
ü
Do not allow children to play with the appliance or with the fixed control devices.
ü
Do not operate the blind when maintanance operations are being carried out (e.g. window cleaning, etc.). If the control device is automatic, disconnect the
motor from the power line.
01.3 WARNING FOR USE
ü
Incorrect installation can cause serious injuries.
ü
Keep these instructions for future maintenance work and disposal of the product.
ü
All the product installation, connection, programming and maintenance operations must be carried out only by a qualified and skilled technician, who must
comply with laws, provisions, local regulations and the instructions given in this manual.
ü
The wiring must comply with current CEI standards. The final electrical system must be created only by the electrician.
ü
Some applications require hold-to-run operation and can exclude the use of radio controls or require particular safety devices.
ü
To prevent potentially dangerous situations, check the operating condition of the roller shutter/awning regularly.
