03
02. ASSEMBLY INSTRUCTIONS
X
Components label:
(1) Blades
(2) Sensor body
(3) Connector for cable
(4) Closing cover
(5) Closing cover scew
(6) Retaining cable
(7) Adjusting and fixing screws
(The screws must
never be completely unscrewed)
(8) Wall fixing
(9) Wall support
(10) Screws cover
2
1
6
7
10
3
4
5
8
9
02.2 FIXING SYSTEM
02.3 MOUNTING INSTRUCTIONS
Insert the connector (with the wire)
on the right way and on the
provided place.
E
Fix the wall support on the more
suitable surface through the
supplied plugs and screws.
A
Plug up the cable through the
provided retaining cable, using the
two screws.
F
Close the two screws that fix the
wall support and sensor using
suitable tools.
B
Close the cover.
G
Unscrew the screw and
open the closing cover placed
under the sensor.
D
WARNING:
Adjusting and fixing screws
(7) must never be completely unscrewed
Notes:
ü
the product has been studied to be installed with the blades facing downward. Moreover, the body sensor must be adjusted horizontally (the use of a
bubble level can simplify the operation); the wall bracket with tilting angle ±90°allows to mount the sensor even on no-vertical structures.
ü
the hole interaxis is 30 mm.
02.1 BUTTON AND LED DIAGRAM
Led
SUN
Led
MANOEUVRE
P2
P3
Led
WIND
P1
