background image

Dear customer, thank you for purchasing a STAFER product. This guide contains information about the product use. Before the product installation and use, 
please read carefully this guide and keep it for future reference.

593.K.RS.00 is a sun/wind device studied to command tubular motor with mechanical limit switch powered by main voltage and it is suitable to command 
awnings, roller shutters or similar.

593.K.RS.00   permits to command the automatic upward movement of the blinds connected to the motor when the wind exceeds the set threshold and to 
command an automatic lowering when the intensity of sun exceeds the threshold set. These thresholds are set by the factory, but they can be adjusted 
according to the needs.

SIRIO / SIRIO DUO

01

01 Warning 

 

 

 

 

 

 

 

 

pag. 02

02 Assembly instruction 

 

 

 

 

 

 

 

 

pag. 03

03 Electrical connection 

 

 

 

 

 

 

 

 

pag. 04

04 Interfacing with home automation control unit 

 

 

 

 

 

 

 

 

pag. 05

05 How to memorize the first handheld transmitter 

 

 

 

 

 

 

 

 

pag. 06

06 Operating logic of command buttons 

 

 

 

 

 

 

 

 

pag. 06

07 Memorization/deletion of a transmitter 

 

 

 

 

 

 

 

 

pag. 07

08 Wind sensor 

 

 

 

 

 

 

 

 

pag. 08

09 Sun function 

 

 

 

 

 

 

 

 

pag. 09

10 Anemometric Test function 

 

 

 

 

 

 

 

 

pag. 09

11 Reset 

 

 

 

 

 

 

 

 

pag. 10

12 FAQ 

 

 

 

 

 

 

 

 

pag. 10

Index

STAFER uses packaging recyclable materials. Dispose materials on the proper containers, complying with the law in force in your locality. 
This product may have substances that are polluting for the environment and dangerous for the health. 
At the end of the product life cycle, carefully comply with the waste disposal rules. It is strictly forbidden to dispose the product on the domestic 
waste.

Environmental conservation!!

It is advisable 

to avoid using radio systems in areas with strong interference

 (for example, near police stations, airports, ports, hospital, etc.).

 A technical inspection is in any case advisable before installing any radio system in order to identify sources of interference.
Radio systems can be used where possible disturbances or malfunctioning of the transmitter or the receiver do not cause a risk factor, or if the risk 
factor is cancelled by suitable safety systems.
The presence of radio device operating on the same transmission frequency  (

433,42 MHz

) can interfere with the radio receiver of the motor and so 

reduce the range of the system and limit the functionality of the installation.

Notes on radio systems

This sensor does not protect awning in case of strong and sudden gusts of wind.

 

In case of weather hazards of this type, make sure that the curtains remain closed!

STAFER S.p.A. declines all responsibility for damage incurred due to weather events not detected by the device.

Any other use beyond the field defined by STAFER S.p.A. is prohibited and involves, as well as the failure to comply with instructions provided in this guide, the 
cancellation of  STAFER S.p.A. liability and warranty. 
The installer, after the installation of the product,  must teach the end user about the working way of the automation and provide him with the user manual.

Warning

ü

Power supply: 

120 o 230 Vac, 50/60 Hz

ü

Dimensions: 

236 x 54 x 73 mm

ü

Weight: 

200 gr

ü

Working temperature: 

from –20 to +55 °C

ü

Wind threshold: 

from 10 to 35 Km/h

ü

Sun threshold: 

from 1 to 45 Klux

ü

Working frquency: 

433.42 Mhz

ü

Memorizable radio codes: 

15

ü

Range (estimate): 

100m outdoor, 20m indoor

Technical specifications

Summary of Contents for 593.K.RS.00












Reviews: