SST-ASI-SLC User’s Guide
42
7.1.1 G File Examples
Example 1
In this example, we want:
•
channel 1 enabled
•
Auto Address Programming enabled on channel 1
•
run-time parameter changes disabled on channel 1
We will use the G file for configuration on channel 1. The following slaves
will be configured:
To accomplish this, follow these steps:
1. Write 13635 (=3543h) to word 63 in the G file.
2. Write BF07h (=1011 1111 0000 0111) to word 1 to enable the
channel, disable run-time parameter changes, enable Auto Address
Programming on channel 1 and to configure slave 1.
3. Write 9F03 (=1001 1111 0000 0011) to word 2 to enable
configuration from the G file and to configure slave 2.
4. Write 1F00 (=0001 1111 0000 0000) to word 3 to configure slave 3.
5. Write 1F08 (=0001 1111 0000 1000) to word 5 to configure slave 5.
6. Write 1911 (=0001 1001 0001 0001) to word 7 to configure slave 7.
Slave
Parameters
ID
I/O
1
F
0
7
2
F
0
3
3
F
0
0
5
F
0
8
7
9
1
1
Summary of Contents for SST-ASI-SLC
