SST SST-ASI-SLC, User Manual

Page: 41 / 74

Configuring the Master and Slaves
35
5. Once you have verified that your slave is present, you can change its
network address using the Address command. In this example, slave
0 is changed to slave 3.
Config :> address
Enter slave # to change: 0
Enter new # for slave 00: 3
6. Verify the operation with the List command.
Config :> list
Slave ID IO P PID PIO
03 0 8 F
7. If everything is OK, add a new slave at address 0. Verify with the
List command.
Config :> list
Slave ID IO P PID PIO
00 0 0 F
03 0 8 F
8. Continue to add slaves, assign addresses and verify the operations
until all slaves are added.
Config :> address
Enter slave # to change: 0
Enter new # for slave 00: 1
Config :> list
Slave ID IO P PID PIO
01 0 0 F
03 0 8 F