SST SST-ASI-SLC, User Manual

Page: 29 / 74

Theory of Operation
23
If an error occurs during the error recovery process or if an error is found in
the G file, the fault will be indicated as a non-recoverable fault. The error
handler will still execute, but the SLC will be unable to clear the major error
flag and the scanner will stop.
4.9 Clearing Faults
When you cycle the SLC from program to run, the fault is cleared if the cause
of the fault has been removed. If you receive an error 71h or 72h, you must
wait at least 3 seconds before switching from program to run on the SLC to
allow the scanner time to write the configuration to
EEPROM.