User Manual
Universal Serial/PROFIBUS DP Gateway
GT200-DP-RS
WWW.SSTCOMM.COM
5
2.3 LED Display
The LED display is located in the front of the product. Please refer to
to change DP address and
operating mode.
LED Display
Description
CF
Configuration mode.
db
Debug mode.
Jumps between a
number and “-P”
Run mode. The number is the GT200-DP-RS’s PROFIBUS DP address. “-P”
indicates that the GT200-DP-RS is in the “DP Integrated Configuration” mode
allowing all the parameters in the PROFIBUS DP integrated configuration
software, such as the STEP7 (
) and TIA Portal to be configured.
Jumps between a
number and “-U”
Run mode. The number is the GT200-DP-RS’s PROFIBUS DP address. “-U”
indicates that the GT200-DP-RS is in the “Software Configuration” mode and is
configured through the SST-MPG-CFG software (
).
Note:
In Software Configuration mode (LED displays “-U”):
1. If the GT200-DP-RS is configured via USB cable, it will automatically switch to configuration mode.
2. If it’s configured via RS-232 interface, the GT200-DP-RS should switch to configuration mode manually. See
chapter 2.4 for how to switch mode.
2.4 DP Address and Mode Setting Button
The DP address and mode setting button is located on the front panel of the GT200-DP-RS. It’s used to set the
PROFIBUS DP address and operating mode.
