User Manual
Universal Serial/PROFIBUS DP Gateway
GT200-DP-RS
WWW.SSTCOMM.COM
2
4800, 9600, 19.2 K, 38.4K, 57.6K and 115.2K bps. Parity: None, Odd, Even, Mark and Space.
[4] As a Modbus master, supports 01, 02, 03, 04, 05, 06, 15 and 16 function codes.
Supports monitoring status of Modbus slave(s).
Supports clearing data or keeping the data when the input data is abnormal.
Supports command retries when response timeout.
[5] As a Modbus slave, supports 01, 02, 03, 04, 05, 06, 15 and 16 function codes. .
[6] Supports two configuration modes:
Uses SST-MPG-CFG software to configure the GT200-DP-RS (Software Configuration mode):
Supports up to 100 Modbus commands. Function code 03 and 04 support “Word / Byte mapping”. The
high-byte or low-byte mapping of the registers provides effective utilization of the PROFIBUS DP
input-byte.
Use DP Integrated software to configure the GT200-DP-RS (DP Integrated Configuration mode):
Supports up to 48 Modbus commands.
Supports command sending control and capturing exception codes.
[7] In universal mode, supports the control mode of character timeout and frame length (number of character).
Supports periodically sending.
[8] Power: 24VDC (11V~30V), 80mA.
[9] Operating temperature: -4°F~140°F (-20°C~60°C). Humidity: 5%~ 95% (non-condensing).
[10] Dimensions (W*H*D): 1.0 in * 4.0 in *3.6 in (25 mm * 100 mm * 90 mm).
[11] Installation: 35mm DIN RAIL.
[12] Protection Level: IP20.
[13] In accordance with EMC test standard.
