User Manual
Universal Serial/PROFIBUS DP Gateway
GT200-DP-RS
WWW.SSTCOMM.COM
56
Add a Status Module. Assume that its value is “C6” now. If the user’s Modbus master uses function code 04 to
inquiry the 3x0001 input register, the GT200-DP-RS is able to respond correctly then the value of status module
will change to “C7”. If the Modbus master inquiry the 3x1000 register which is an illegal address for the
GT200-DP-RS with the configuration in above figure, the value of status module won’t change.
7.4 DPRS2T.GSD
In the “DP Integrated Configuration” mode, if user wants to transmit universal serial data by GT200-DP-RS, the
corresponding GSD file is
DPRS2T.GSD
with the device name “GT200-DP-RS Serial V6.0”.
Note:
Please see
for working principle of universal serial mode.
The supported modules are the same with that of
DPRS2A.GSD
. Please refer to the GSD file or
for
complete details.
PROFIBUS DP Slave Properties
The configurable properties of GT200-DP-RS are shown below:
