52
CARE, CLEANING & MAINTENANCE
ATTENTION
For cleaning, maintenance and / or repair work, the power supply must be completely disconnected from
the wall socket.
CLEANING
Remove sweat from your training device after each training session. Do this carefully with a softly wetted
cloth and mild soap. Do not use solvents. Regular cleaning significantly enhances the lifetime of your
training device. However, DO NOT use any liquids near the power suply, the computer/display or any other
electric or electronic devices.
Damage caused by perspiration or other liquids, are not covered at any time by the warranty.
Also during training, prevent liquids (like drinks) to enter the training device or the computer.
MAINTENANCE
The training device is equipped with sealed bearings. Lubrication is not required.
CHECKING THE FIXING MATERIAL
Before each training session, check the tightness of bolts and nuts. Re-tighten, if necessary.
CHECKING THE COMPONENTS
Before each training session, check the safe condition of seat post, handlebars and pedals.
CAUTION:
Never start or continue a training when components are loose or even damaged.
DISPOSAL
Sportstech Brands Holding GmbH hereby declares that the radio system type is compliant with EU Directive 2014/53 / EU.
The full text of the EU declaration of conformity is available at the following internet address:
https://service.innovamaxx.de/esx600_conformity
CONFORMITY
Dear customers,
As an end user, you are legally obliged to collect waste electrical and electronic equipment and batteries as well as accumulators separately from
municipal waste. We want to make this as easy as possible for you. Please note the information on this page and on the back.
Notes on EU directive 2012/19/EU (in Germany implemented in ElektroG (Law about electric and electronic devices);
elsewhere implementation may differ)
We advise owners of electric and electronic equipment that waste electrical and electronic equipment must be collected separately
from municipal waste in accordance with the applicable legal regulations. The symbol of a crossed-out garbage can, which is shown
on waste electrical and electronic equipment, also indicates the obligation to collect this waste separately.
B. Notes on disposal and symbols for an electrical appliance based on EU Directive 2006/66/EU (in Germany in
accordance with the Battery Act (BattG); elsewhere, implementation may differ)
Old batteries and accumulators must not be disposed of with household waste. As an end user, you are legally obliged to return used
batteries.
The symbol with the crossed-out garbage can means that you are not allowed to dispose of old batteries in the household
waste.
Use the official collection points for this, such as the collection points of public waste disposal carriers. You can also return
used batteries to retail outlets, provided they sell batteries. If the symbol Cd, Hg, or Pb is displayed under the symbol of the crossed-out garbage
can, this is an indication that the battery contains either cadmium, mercury or lead. These are toxic heavy metals that not only pose significant risks
to the environment but also to human health.
Recycling loop
Packaging material can be conveyed back to the raw material cycle. Dispose of packaging material in accordance with legal
provisions. Information can be retrieved from the return or collections systems of your community.
Summary of Contents for ESX600
Page 1: ...ESX600 Home Trainer DE EN ES FR IT NL...
Page 2: ...2...