SportsArt Fitness T631, Owner'S Manual

Page: 52 / 58

A. When the ”SERVICE NEEDED- APPLY LUBE” message appears, simultaneously
press and hold INCLINE
▲
+INCLINE
▼
+
0 for two seconds. The motor will operate
at a low speed, allowing lubricant to spread evenly on the walk belt. The display will
show the following message: ”PLEASE PRESS THE STOP KEY AFTER FINISHING
LUBRICATION”.
B. At this time, press the STOP key to stop motor rotation. This ends the treadmill
lubrication process, clears the lubrication distance value, and begins the calculation
of the next lubrication period's distance value.
The physical task of lubricating the treadmill can be done at any time. When the
startup banner, SPORTSART-XXX, is displayed, simultaneously press and hold
INCLINE
▲
+ INCLINE
▼
+ 0 for two seconds. The motor will operate at low speed
and lubricant will be dispersed.
Then the message "PLEASE PRESS THE STOP KEY AFTER FINISHING
LUBRICATION" appears.
9.3 CLEARING THE SERVICE NEEDED MESSAGE
9.4 MANUAL LUBRICATION PROCEDURE
-49-