SportsArt Fitness T631, Owner'S Manual

Page: 57 / 58

ERROR MESSAGES
1. Display format:
E R R O R X Y
2. Explanations for each error message:
ERROR 1 1 The AC servo motor encoder is out of order. Please re-start the unit.
ERROR 1 2 The AC servo motor is overheated. Speed is restricted to half.
ERROR 1 3 The AC servo motor suddenly accelerated. Please re-start the unit.
ERROR 2 1 The IGBT current is too high. Please re-start the unit.
ERROR 2 2 The IGBT is too hot. Speed is restricted to half.
ERROR 2 3 The current sensor indicates excessive current. Please turn off the
unit and wait. Then restart the unit.
ERROR 3 1 The elevation motor has a calibration issue.
ERROR 4 2 The power supply voltage is too low. Re-start the unit after stabilizing
the power supply.
ERROR 4 3 The power supply voltage is too high. Re-start the unit after
stabilizing the power supply.
ERROR 8 1 There is a communication error between control board and servo
driver when powering the treadmill on.
ERROR 8 2 There is a communication error between control board and servo
driver during exercising.
-54-