69
Spohn & Burkhardt
DRAFT
Console shape R
Figure 20.
26
27, 28
Opening console shape R
Open the consoles of console shape R by undoing the 4 screws (
26
) and removing the side cover.
12. Connect the corresponding cables as per the related circuit diagrams
and requirements of the operating organization.
13. Undertake setup,
(see chapter 5. “Setup”, page 70).
Variant with spacer 52832; 43666 and 53153
Figure 21.
17
17
4
19
23
Electrical connection: Variant with spacer 52832; 43666 and 53153
1. Disconnect the system from the supply of electrical power.
2. Undo the 5 screws (
19
) for the cover (
23
) on the spacer (
4
) and remove the cover (
23
).
3. Route the cables from below into the spacer (
4
).
Attention!
Make sure all cables are laid correctly without kinks or points where they can chafe.
4. Undo the lock nut (
21
) on the cable opening (
17
) and remove the corrugated tube (
22
) from the
cable opening (
17
) on the spacer,
Summary of Contents for FS Series
