DRAFT
34
Spohn & Burkhardt
6.6. Replacing air outlet nozzles
Figure 22.
1
2
Replacing air outlet nozzles
Replace damaged air outlet nozzles (
2
) as follows:
1. Carefully release the corresponding air outlet nozzle (
2
) from the housing (
1
) using a suitable tool
(e.g. screwdriver).
2. Clamp the new air outlet nozzle (
2
) back in the housing (
1
).
6.7. Replacing heater and ventilation control unit
see section 8.2 “Removing heater and ventilation control unit”, page 35 and section 3.2 “Installing heater
and ventilation control unit”, page 28.
6.8. Inspection
An inspection is only allowed to be undertaken by authorized specialist personnel.
7. Repair
Danger!
All tasks on the device are only allowed to be undertaken by specialist personnel taking
into account the relevant safety regulations. Always pay attention to the safety instruc-
The repair of the heater by the operating organization is not foreseen. If repair is necessary, contact
SPOHN & BURKHARDT (for address
Summary of Contents for FS Series
