DRAFT
86
Spohn & Burkhardt
7.1.3. Checking screw joints
Check all screw joints for correct seating.
Tighten the screws if necessary.
7.1.4. Lubricating pivoting motor base
Figure 40.
36
36
35
Lubricating pivoting motor base
1. Undo the screws (
36
) for the motor cover (
35
) and remove the motor cover.
2. Lubricate the lubrication points on the pivoting motor base, for lubrication points
• Lubricant: Interflon Fin Grease OG (or equivalent lubricant).
3. Re-fit the motor cover (
35
) and fasten the motor cover (
35
) using the screws (
36
).
Summary of Contents for FS Series
