Date d'émission :
Janvier, 2019
Révision: 2
Page :
38/60
Problem
Possible cause
Solution
The auger is creating
noise as it rotates
•
The bell shaped shaft seal has been
replaced without lubrication or is
damaged
•
The auger has been incompletely or
incorrectly reassembled
•
Replace or clean and lubricate with the
lubricant provided with the machine
•
Check and correct
The CUT OUT light on
the right side panel is on
•
The filter is dirty and needs to be
cleaned
•
The unit is positioned too close to a
wall or other object restricting air
flow and causing the machine to
run at a higher temperature
•
The filter is not properly installed
•
The unit has been installed near a
heat source, such as a coffee
machine, ice maker or cold
beverage machine which expels hot
air from its vents, causing the
machine to run at a high
temperature.
•
Clean and replace filter following
instructions
•
Reposition unit to maximize ventilation
space (see installation figures)
•
Properly install filter see
•
Reposition unit to maximize ventilation
space (see installation figures)
