© 2009 SpinetiX S.A. All rights reserved.
38
By default the serial port control is disabled. It is enabled by selecting a protocol file in
the Protocols drop-box. Choose either pre-loaded files designed by SpinetiX (identified by
the prefix [sys] before the name of the protocol), or files that you have uploaded using
the Upload function.
Configuring the protocols
The drop down menu below shows an HMP100’s configuration where the following
protocol files can be selected:
No protocol files, the RS232 interface is disabled ([disabled])
A system version of the Sharp Aquos protocol ([sys]sharp_aquos)
An uploaded protocol file for the LG LF65 screen (LG LF65)
An uploaded protocol file for the Sharp Aquos monitors (sharp_aquos)
Once a protocol file is selected, you might choose to change the serial port configuration
or to enable automatic power on and power off of the attached screen.
