SpinetiX HMP100 User Manual Download | Manualshive

Page: 32 / 46

background image

© 2009 SpinetiX S.A. All rights reserved.

32

By default USB storage device are formatted using FAT file systems. This has the
advantage that the USB storage is readable both by the HMP100 and any PC. However
such USB device can only be used for reading mode by the HMP100. If you need to use
the USB storage permanently, you might want the HMP100 to be able to write on the

USB device. To do so, the USB must be formatted by the HMP100.

1.

Plug your USB storage device to the HMP100

2.

Press the Format Now button

Warning:

all content of the USB storage device will be erased.

Note: the USB storage device will no longer be recognized by Windows PCs.

3.

When the formatting is over, unplug the USB storage device from the HMP100

4.

Plug the USB storage device to the HMP100.

Note: you need now to upload content to the USB storage device using the

HMP100 WebDAV server.

If you are using a USB storage device in write mode, it is recommended to press the

Disconnect button before removing the device from the HMP100.

«
...
30
31
32
33
34
...
»

Summary of Contents for HMP100















































Reviews:

No comments

Related manuals for HMP100

Brand: WALKMAN Pages: 6

Brand: Datel Pages: 22

Brand: Z3 Technology Pages: 86

Brand: GME Pages: 21

Brand: Coby Pages: 1

Brand: Monacor Pages: 20

Brand: ICP DAS USA Pages: 8

Brand: Deltaco Pages: 26

Brand: Onkyo Pages: 16

Brand: Nakamichi Pages: 33

Indigo ADDEC-210

Brand: Crystal Vision Pages: 37

BLANKOM SDE-1265

Brand: Irenis Pages: 22

Brand: American Dynamics Pages: 4

Brand: Daewoo Pages: 16

Brand: Datavideo Pages: 52

Brand: SICK Pages: 21

JN102 - 10.2" LCD Overhead Monitor System

Brand: Jensen Pages: 11

Brand: Pulse-Eight Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands