© 2009 SpinetiX S.A. All rights reserved.
36
Content Server:
Controls the access to all content displayed by the HMP100.
This username and password will be needed to upload content on the HMP100.
Monitoring:
Controls the access to the logs and snapshot of the HMP100.
Configuration guide:
1.
In the main page of the HTTP server of your unit, select in the left menu the
Security
item that you find under
Administration.
The current security settings
will be shown on your browser.
2.
Choose the type of access you would like to configure.
Note: it is recommended to always setup a password for the Administrative area.
By default no password is set and the administrative area is not protected.
3.
Enter the password and confirm it in the second text area.
4.
Press Apply to save your changes.
Note: you need to press apply for each password you want to change. Thus it is
possible to change only one password at the time.
