Sperry Marine 5016-CA, Operation, Installaion And Service Manual

Page: 72 / 132

056376/A Analogue Compass Repeaters
7-6 Location of Parts on the Analogue Repeater PCB
7.3 Location of Parts on the Analogue Repeater PCB
Figure 7-2 below shows the locations of connectors and diagnostic LED
indicators on the repeater PCB.
Figure 7-2:
Location of parts
on the analogue
repeater PCB
CAUTION
Risk of damage through unauthorized service
The analogue compass repeaters are complex electronic devices, which
are not serviceable in the field down to the level of individual circuit com-
ponents.
Defective units must be sent back to Sperry Marine for repair.
CAUTION
Risk of damage of electrostatic-discharge-sensitive components
The analogue compass repeaters contain electrostatic sensitive compo-
nents. Electrostatic discharge may permanently damage components.
When servicing an analogue compass repeater, take precautions to pre-
vent electrostatic discharge.
Avoid touching any of the electronic circuitry.
CR 5
CR 1
CR 3
CR 11
CR 12
CR 24
CR 25
CR 18
CR 19
J 2
J 5
J 3
J 6 TB 1
PE1