Sperry Marine 5016-CA, Operation, Installaion And Service Manual

Page: 61 / 132

Analogue Compass Repeaters 056376/A
Configuration Parameters 6-9
Gyro Selection
Selects the accepted NMEA 0183/IEC 61162 sentences for gyrocompass
and THD headings.
Settings: automatic
No restriction. Accept, in the following order of priority:
- $HETHS,
- $--THS with any other talker ID (except HC),
- $HEHDT,
- $--HDT with any other talker ID (except HC).
If the talker ID is “GP”, the source is treated as a THD, in all
other cases, the source is treated as a gyrocompass.
HETHS
Accept $HETHS only.
xxTHS
Accept $--THS with any other talker ID (except HC).
HEHDT
Accept $HEHDT only.
xxHDT
Accept $--HDT with any other talker ID (except HC).
GPTHS
Accept $GPTHS only. The source is treated as a THD.
GPHDT
Accept $GPHDT only. The source is treated as a THD.
Magnetic Selection
Selects the accepted NMEA 0183/IEC 61162 sentences for magnetic com-
pass heading.
Settings: automatic
No restriction. Accept, in the following order of priority:
- $HCHDT
- $HCHDM
- $HCHDG
HCHDT
Accept $HCHDT only.
HCHDM
Accept $HCHDM only.
HCHDM
Accept $HCHDG only.