Sperry Marine 5016-CA, Operation, Installaion And Service Manual

Page: 43 / 132

Analogue Compass Repeaters 056376/A
Bearing Repeater 5-3
17. Punch or cut a hole for the connection cables into the grommet, slide
the grommet onto the cables and press it into the cable exit.
18. Remove the cover plate from the connection box.
19. Remove the cable jacket from the ends of the connection cables,
draw back the cable screens and insert the cables into the connec-
tion box through the cable glands.
20. Firmly tighten the cable glands. Make sure to establish a solid con-
nection between the screens and ship’s ground via the glands.
21. Connect the repeater and shipside wires to the terminal blocks as
per the wiring diagrams and connection drawings provided.
22. In case a custom configuration is required, configure the repeater
now using the SUSI application (see chapter 6, ‘Configuration”).
23. Attach the cover plate to the connection box, power up the compass
system and carry out a full functional test of the repeater.