Sperry Marine 5016-CA, Operation, Installaion And Service Manual

Page: 56 / 132

056376/A Analogue Compass Repeaters
6-4 Configuring the Analogue Repeater with SUSI
10. If the service PC has not previously been used to service an ana-
logue repeater, a warning message will pop up, indicating that the
parameter list for the device is empty:
Click to read the current configuration from the repeater and
to set the Main page parameter controls accordingly, or
click if you intend to set all parameters manually in SUSI
first and write them to the repeater later.
11. If you clicked in the previous step, a dialogue box will pop
up, asking whether the parameters should be saved as default set-
tings for this device:
Click . to save the parameters as default settings or
to cancel.
12. If you clicked in the previous step, the default settings are
now written to a file named “RCSdefault.xml“ in the sub-directory
“Parameter Files” in SUSI’s installation directory.
13. Using the Main Page controls, set the repeater configuration param-
eters and dimming values as required. An overview and detailed
descriptions of the parameters are given below (see “Configuration
Parameters” on page 6-6 and “Dimming Values” on page 6-12).
14. When all parameters are set as required, click to transfer the
settings to the repeater.
Note If a default parameter file for the analogue repeater already exists, e. g. if
the PC has been used previously to service a repeater, the above warning
message will not appear.
In this case, do not write back settings to the repeater before all parame-
ters have been set as required for the repeater under service.