Sperry Marine 5016-CA, Operation, Installaion And Service Manual

Page: 69 / 132

Analogue Compass Repeaters 056376/A
Viewing Error Information in SUSI 7-3
7.2 Viewing Error Information in SUSI
Analogue Repeater Error Page
When connected to an analogue repeater, the Sperry Universal Service
Instrument application (SUSI) provides an “Errors” page which displays
the current activity and confirmation state of a number of possible error
conditions and counts their occurrence since the last power-up:
Figure 7-1:
SUSI errors page
For errors which have not occurred since the last power-up, the state
and confirmation fields will be empty and the counter will read zero.
When an error condition is detected, the state field will read “active”. If
the error condition is no longer present, the state changes to “inactive”.
The confirmation field will always read “not acknowledged” for errors
which have occurred at least once, as the analogue repeater provides no
means to acknowledge an alarm.
As the Errors page is updated continuously, repeated occurrences of an
error lead to a corresponding increase of the error count.
The IDs and descriptions of the error conditions shown on SUSI’s
“Errors” page are given in table 7-1 below.
For more information on the SUSI application, refer to chapter 6 (“Con-
figuration”) and to the SUSI Installation Guide included in the Sperry
Marine Client-CD 056800.