Spektrum DX18t Instruction Manual Download Page 45

Page: 45 / 46

SPEKTRUM DX18t • TRANSMITTER INSTRUCTION MANUAL

  AT   BE  BG   CZ  CY  DE  DK
  EE  ES  FI  FR  GR  HR  HU
  IE  IT  LT  LU  LV  MT  NL
PL  PT  RO  SE  SI  SK  UK
IS  LI  NO  CH

Declaration of Conformity

(in accordance with ISO/IEC 17050-1)

No. HH2014082403
Product(s):

DX18t DSMX Transmitter Only MD 1–4

Item Number(s): SPM2810

Equipment class: 2
The object of declaration described above is in conformity with the

requirements of the specifications listed below, following the provi-

sions of the European R&TTE Directive 1999/5/EC, EMC Directive

2004/108/EC and LVD Directive 2006/95/EC:

EN 300-328 V1.7.1: 2006

EN301 489-1 V1.9.2: 2012

EN301 489-17 V2.1.1: 2009
EN60950-1:2006+A11:2009+A1:2010+A12: 2011
EN55022:2010 + AC:2011

EN55024:2010
EN61000-3-2:2006+A1:2009+A2:2009

EN61000-3-3:2008

Signed for and on behalf of:

Horizon Hobby, LLC

Champaign, IL USA

August 24, 2014

COMPlIANCE INFORMATION FOR THE EUROPEAN UNION

Mike Dunne

Executive Vice President Product Divisions

Horizon Hobby, LLC

Instructions for disposal of WEEE

by users in the European Union

This product must not be disposed of with other waste. Instead,

it is the user’s responsibility to dispose of their waste equipment

by handing it over to a designated collections point for the recy-

cling of waste electrical and electronic equipment. The separate

collection and recycling of your waste equipment at the time of

disposal will help to conserve natural resources and ensure that

it is recycled in a manner that protects human health and the

environment. For more information about where you can drop

off your waste equipment for recycling, please contact your

local city office, your household waste disposal service

or where you purchased the product.

IC INFORMATION

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this

device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired

operation of the device.

Summary of Contents for DX18t















































Search results

Summary of Contents for DX18t

Reviews:

Related manuals for DX18t

Brands by name

Popular brands

Spektrum DX18t, Instruction Manual

Search results

Summary of Contents for DX18t

Reviews:

Related manuals for DX18t

Brands by name

Popular brands