Spektrum DX18t Instruction Manual Download Page 43

Page: 43 / 46

SPEKTRUM DX18t • TRANSMITTER INSTRUCTION MANUAL

FAA INFORMATION

Prior to flying, contact your local or regional modeling organizations

for guidance and familiarize yourself with the current local rules

and FAA regulations governing model aviation in your location.

More information about model aviation can be found

at www.modelaircraft.org.
The Federal Aviation Administration can be found online

at www.faa.gov.

Warranty and Service Contact Information

Country

of Purchase

Horizon Hobby

Phone Number /

Email Address

Address

United States

of America

Horizon Service Center

(Repairs and Repair Requests)

servicecenter.horizonhobby.com/

RequestForm/

4105 Fieldstone Rd

Champaign, Illinois, 61822 USA

Horizon Product Support

(Product Technical Assistance)

www.quickbase.com/db/

bghj7ey8c?a=GenNewRecord

888-959-2305

Sales

[email protected]

888-959-2305

United Kingdom

Service/Parts/Sales:

Horizon Hobby Limited

[email protected]

+44 (0) 1279 641 097

Units 1-4 Ployters Rd

Staple Tye

Harlow, Essex

CM18 7NS, United Kingdom

Germany

Horizon Technischer Service

[email protected]

+49 (0) 4121 2655 100

Christian-Junge-Straße 1

25337 Elmshorn, Germany

Sales: Horizon Hobby GmbH

France

Service/Parts/Sales:

Horizon Hobby SAS

[email protected]

+33 (0) 1 60 18 34 90

11 Rue Georges Charpak

77127 Lieusaint, France

China

Service/Parts/Sales:

Horizon Hobby - China

[email protected]

+86 (021) 5180 9868

Room 506, No. 97 Changshou Rd.

Shanghai, China 200060

hour of labor. In addition you will be billed for return freight. Horizon

accepts money orders and cashier’s checks, as well as Visa,

MasterCard, American Express, and Discover cards. By

submitting any item to Horizon for service, you are agreeing

to Horizon’s Terms and Conditions found on our website

http://www.horizonhobby.com/content/_service-center_

render-service-center.

ATTENTION: Horizon service is limited to Product

compliant in the country of use and ownership. If received,

a non-compliant product will not be serviced. Further, the

sender will be responsible for arranging return shipment

of the un-serviced product, through a carrier of the

sender’s choice and at the sender’s expense. Horizon

will hold non-compliant product for a period of 60

days from notification, after which it will be discarded.

This device complies with part 15 of the FCC rules. Operation

is subject to the following two conditions: (1) This device may

not cause harmful interference, and (2) this device must accept

any interference received, including interference that may cause

undesired operation.

CAUTION:

Changes or modifications not expressly

approved by the party responsible for compliance could

void the user’s authority to operate the equipment.

This product contains a radio transmitter with wireless

technology which has been tested and found to be compliant

with the applicable regulations governing a radio transmitter

in the 2.400GHz to 2.4835GHz frequency range.

Antenna Separation Distance

When operating your Spektrum transmitter, please be sure

to maintain a separation distance of at least 5 cm between

your body (excluding fingers, hands, wrists, ankles and feet)

and the antenna to meet RF exposure safety requirements

as determined by FCC regulations.
The illustrations below show the approximate 5 cm

RF exposure area and typical hand placement when

operating your Spektrum transmitter.

FCC INFORMATION

Summary of Contents for DX18t















































Search results

Summary of Contents for DX18t

Reviews:

Related manuals for DX18t

Brands by name

Popular brands

Spektrum DX18t, Instruction Manual

Search results

Summary of Contents for DX18t

Reviews:

Related manuals for DX18t

Brands by name

Popular brands