Spectrum Quad Plex, User Manual, Page: 34 / 62

RG B
C H A P T E R 3
Op e r a t i o n
24 QuadPlex User Guide 350-12336-01 – updated April, 2020
The
QuadPlex
application simplifies configuring and creating wall designs for
QuadPlex
devices.
This application works in offline mode to customize configurations of any type and size without
needing an active connection to the
QuadPlex
device(s), including:

Independently rotating each output in 90-degree increments (90, 180, and 270) for artistic
video wall configurations.

Using preset images to control and fine-tune bezel corrections to ensure seamless image
displays.

Optimize visuals by cropping, upscaling, or downscaling the content as desired.
Starting the
QuadPlex
application for the first time creates a new, blank
design
. A design contains
both the devices in a video wall and their settings.
3.2.1 Interface
Figure 3-1 displays the
QuadPlex
application interface.
Figure 3-1 QuadPlex Application Interface
The numbered callouts in this figure depict the following components:

Menus (1): The
QuadPlex
application contains three menus:

File: Create, open, and close designs, and exit the
QuadPlex
application. See “Creating
a New Design” on page 26 , “Opening an Existing Design” on page 26 , “Closing a
Design” on page 27 , and “Exiting the QuadPlex Application” on page 26 .
3.2 Using the QuadPlex Application
1 2 3 4 5 6 7 8 9 10 11 12