Spectrum Quad Plex, User Manual, Page: 16 / 62

RG B
C H A P T E R 1
I n t r o d u c t i o n
6 QuadPlex User Guide 350-12336-01 – updated April, 2020
This section describes the connectors a
QuadPlex
PCIe card.
1.4.1 Connectors and Indicators
Figure 1-3 shows the connectors and indicators on a
QuadPlex
PCIe card, and Table 1-3
describes them.
Figure 1-3 Connectors and Indicators - PCIe Card
Table 1-2
QuadPlex
Rear Panel Controls and Indicators - Standalone
ID Name Description
1 Video input This will be either:
 HDMI 2.0 (QPX HIN)
 DisplayPort 1.2 (QPX DIN)
2
HDMI outputs Connect up to four HD monitors to these outputs.
3
LAN Connect this port to a network to use IP control.
4
Network activity LED (green) Indicates network activity as follows:

Not lit: No network activity detected.

Green (fast blink): Network activity detected.
5 Network speed LED (amber) Indicates network speed as follows:
 Not lit: Speed below 1 Gbps
 Green (solid): Transmitting at 1 Gbps
6
Power connector Connect the 12VDC 3.5A power supply to this port.
1.4 Connectors (PCIe Card)
2 1 3
4 5