manualshive.com logo in svg

Spectris Particle Measuring Systems LiQuilaz II E, Operation Manual

Share
Download
Spectris Particle Measuring Systems LiQuilaz II E Operation Manual Download Page 84

LiQuilaz II E and S Operations Manual

Page E-1

Appendix E
Configuring for Ethernet

Configuration Basics

Configuration is the process of entering Ethernet settings that will allow the LiQuilaz II 
Liquid Particle Counter to communicate over a specific network.

Appropriate Ethernet settings are required for both the PMS Ethernet protocol, used 
with Facility Net, and the Modbus TCP protocol (see 

Appendix

 

C, 

“Modbus TCP 

Protocol”) for use with third party applications.

NOTE:

 

The following information assumes that the user has a working 

knowledge of terminal emulation software such as 
HyperTerminal

®

.

When to Configure the Sensor

The sensor should have the appropriate Ethernet settings configured 

before

 it is wired 

to a network. This can be performed either before fluidic installation, if access to the 
back of the sensor is problematic, or in-situ, if back panel access is not an issue.

Required Hardware and Software

•

RS-232 cable and USB to RS-232 adaptor (if the PC lacks a serial port)

•

Computer loaded with terminal emulation software

NOTE:

 

Microsoft Windows® includes a terminal emulator called 
HyperTerminal. Other terminal emulator programs, are widely 
available. Your IT administrator or microcomputer support 
person may be able to provide assistance.

Summary of Contents for Particle Measuring Systems LiQuilaz II E














































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands