SpectraLink Corporation
Installation, Configuration, and Administration
NetLink Telephony Gateway
Part Number: 72-0065-02-R.doc
Page 45
14.
Telephone Line Configuration
Telephone line configuration is performed after the initial NetLink Telephony
Gateway installation is complete and the Gateway is configured. The configuration
procedure associates a handset with its telephone port in the NetLink Telephony
Gateway.
For the line configuration of handsets, please have the handsets to be configured and
the
Wireless Device Planning Worksheet(s).
There should be one worksheet per NetLink
Telephony Gateway that lists the port assignment, extension, and user name for each
handset. The steps to add a handset will need to be done for each handset on each
NetLink Telephony Gateway.
Note that an 8-port Gateway will only show eight line interfaces on the configuration
screen.
14.1
Adding or Changing a Handset
When adding or changing a handset, a MAC address must be entered. Handset
registration may be accomplished over the air by simply selecting the appropriate line
MAC address field with the arrow keys, typing
R
for
On Air Register
and powering
on the handset. The MAC address is automatically captured. Optionally, the party’s
name and extension number may be recorded. Use the arrow keys to navigate to the
name and extension fields and manually enter the associated data.
The system will not allow you to register the same handset to two different lines. Use
Esc to cancel out of any unwanted transaction.
1.
Navigate to the
NetLink Wireless Telephone System
menu for the NetLink
Telephony Gateway that serves the port to be configured. Select
Telephone Line
Configuration
.
2.
Enter the following information for each assigned line. Use the arrow keys to
navigate through the fields.
MAC Address
: The MAC address is printed on the sticker underneath the battery
on the handset. It can also be displayed on the handset by turning off the
