SpectraLink Corporation
Installation, Configuration, and Administration
NetLink Telephony Gateway
Part Number: 72-0065-02-R.doc
Page 53
18.
Softkey and Shortcut Key Programming
The softkeys on the NetLink e340/h340/i640 and 8000 Series Wireless Telephones
enable quick access to system features. The softkey programming screen establishes
the correspondence between the PBX features, the softkeys, and the shortcut keys.
There are 16 possible features displayed in the four levels of the softkey function
display area. The default softkeys are at level 0 (zero). The end user scrolls through
the softkey display levels by pressing the
FCN
key to move to the next level. The
softkeys are labeled A, B, C, and D and their corresponding display areas on the
handset are shown below.
The handset emulates a specific deskset in your vendor’s PBX system. See the
LinkPlus Interface Guide
for your system for emulation information.
The shortcut keys are
1
-
9
,
0
,
#
, and
*
. Any shortcut key may be pressed by the user
while scrolling through the softkeys or while in the shortcut menu to activate a
feature. The feature will activate whether or not that feature is currently displayed or
highlighted.
The sample screens on the next page illustrate the programming required. The levels
are on the left side of the screen and are labeled
Level 0
,
1
,
2
, and
3
. The softkeys
are labeled
A
,
B
,
C
, and
D
.
The Softkey Function display area displays level 0 features by default.
Therefore Level 0 softkey features are sometimes not assigned a shortcut
key, as they are readily available.
Use the following screen and the table to construct your correspondences.