Spectra Watermakers VENTURA 150, Installation And Operation Manual

Page: 9 / 74

9
Introduction to the Ventura Remote Manual
The Ventura is the finest watermaker for small and midsized yachts. Properly installed and
maintained it will provide years of reliable service. Prudent operation is required with any
marine equipment.
The Spectra Intensifier, known as the Clark Pump, was introduced in 1997 and has been
continually improved since. It is built of modern non
- corrosive composites and comes
with a 20” high rejection membrane.
Front View
Double rubber mounts
to absorb vibration
The Clark Pump Membrane
Module comes pre
- mounted
and plumbed together as a
single unit. The combined unit
saves time and adds
reliability.
Ventura Feed Pump Module
Includes the feed pump, cooling fan, charcoal filter, flush valve,
service valve, and service port. The module has compact and
streamlined plumbing. The cooling fan is included for longevity.
Pressure Relief Valve
Always maintain enough reserve water to get safely into your next port.
CAUTION
!
Note:
If your system came with the optional Z - Ion, the Z - Ion unit will replace the
charcoal filter housing. The photo above, and all subsequent photos of the Feed
Pump Module, will look slightly different.
Fresh Water Flush Solenoid
Inlet
Service
Port
Service
Valve
Cooling
Fan
Shurflo
Pump
Heat Sink
**
Brine Discharge fitting to
facilitate maintenance. Can
be fitted to either side of
the Clark Pump
**