Spectra Watermakers VENTURA 150, Installation And Operation Manual

Page: 21 / 74

21
Customer - Supplied Tank Full Switch
Installing an optional tank full float switch at the top of your water tank
allows the watermaker to fill your ship
’ s water tank then automatically stop
running. The user can then fresh water flush with by hitting ’ Stop ’ and then
’ FWF ’ on the Remote Controller.
Your watermaker does not come with the top - mounted Tank Full Switch (EL
- SWT - LV). However, this part can easily be sourced from your local dealer or
Full Service Provider if you wish for your system to automatically stop once
your freshwater tank is full.
If you do not install the Tank Full switch in your tank, you MUST MANUALLY STOP the system
when your freshwater tank has been filled. The system will not stop automatically.
Note: The float may need to be flipped 180 degrees to work properly. Many floats can be
easily flipped by removing the clip opposite the wire.
Optional Tank Switch
Drill and Tap
Drill and tap a 1/8” NPT port into the top of the fresh water tank that is being filled by the
watermaker. This can be installed on a tank access cover, or directly into the water tank. If
installing on an access cover, be sure to leave a service loop on the float switch wiring to allow
removal of the tank access cover.